Product Description

Aokman K series helical bevel gearbox shaft drive motor gearbox

Product Description

Description: K Series Helical Bevel Gearbox

(1) Input mode: coupled motor, belted motor, input shaft or connection flange.
(2) Right angle output.
(3) Compact structure.
(4) Rigid tooth face.
(5) Carrying greater torque, high loading capacity.
(6) High precision gear, ensuring the unit to operate stably, smooth transmission.
(7) Low noise, long lifespan.
(8) Large overlap coefficient, abrasion resistant.

Detailed Photos

K series gear units are available in the following designs:
KAZ..Y..Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y…Foot-mounted helical-bevel gear units with CHINAMFG shaft
KAT…Y…Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y…Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S…Shaft input helical-bevel gear units
KA…Y…Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y..Combinatorial helical-bevel gear units
KF…Y…Flange-mounted helical-bevel gear units with CHINAMFG shaft
KA(K, KF ,KAF ,KAZ)S…R…Shaft input combinatorial helical-bevel gear units
KAF…Y…Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y…When equipping the user’s motor or the special 1 ,the flange is required to be connected

The weights are mean values, only for reference.
Maximum torque means the biggest 1 of the maximum torque related to the different ratio for the specified size.

Rated Power:0.18KW~200KW
Rated Torque:Up to 50000N.m
Gear Arrangement:Bevel Helical Hardened Gearbox
Input Speed:50HZ or 60HZ of 4Pole,6Pole and 8pole motor

Product Parameters


K(A) K(F) Input power range Output speed Output torque
Foot-mounted Hollow shaft 
Flange-mounted 0.18-200kw 0.1-270r/min Up to 50000Nm

Input power rating and maximum torque:

38 48 58 68 78 88 98 108 128 158 168 188
K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw)
Ratio 5.36~
200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000

Gear unit weight:

38 48 58 68 78 88 98 108 128 158 168 188
11 20 27 33 57 85 130 250 380 610 1015 1700


Packaging & Shipping

Company Profile

After Sales Service

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.


1. How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
2. What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor information etc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
3. What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, environmental protection, logistics and etc.
4.Do you offer any visiting?
Yes! We sincerely invite you to visit us! We can pick you from airport, railway station and so on. Also, we can arrange housing for you. Please let us know in advanced.
5.Is your quality good?
Quality never tell lies, we’re theprofessional manufacturer and exporter of gear reducer and motor in Asia, who has been given license since 1982. Also, we had achieved ISO9001 and CE Certificate among all manufacturers.



If you are interested in our product, welcome you contact me.
Our team will support any need you might have.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Four-Step
US$ 20/Piece
1 Piece(Min.Order)

Request Sample



Customized Request

bevel gearbox

Advantages of Bevel Gearboxes in Specific Scenarios

Bevel gearboxes offer distinct advantages in certain scenarios, making them preferred over other gearbox types:

  • Angular Transmission: When rotational motion needs to be transmitted between intersecting shafts at different angles, bevel gearboxes excel due to their ability to change direction.
  • Compact Spaces: Bevel gearboxes are well-suited for applications with limited space, as they can fit into tight configurations without sacrificing performance.
  • High Torque at 90 Degrees: In situations requiring high torque transmission at a 90-degree angle, bevel gearboxes are more efficient than other types.
  • Steering Mechanisms: Bevel gearboxes are commonly used in steering systems of vehicles and machinery, providing smooth and accurate directional control.
  • Complex Motion Requirements: When machinery or equipment requires intricate motion patterns involving changes in direction and speed, bevel gearboxes offer the necessary versatility.
  • Heavy-Duty Applications: Bevel gearboxes excel in heavy-duty environments where robustness, torque transmission, and durability are crucial.

The specific design and capabilities of bevel gearboxes make them a preferred choice in these scenarios, contributing to optimal performance and efficiency in various industrial applications.

bevel gearbox

Proper Installation and Alignment of Bevel Gearboxes

Installing and aligning a bevel gearbox correctly is essential to ensure its optimal performance and longevity. Here are the steps typically involved in the process:

  1. Preparation: Before installation, thoroughly clean the mounting surfaces of both the gearbox and the driven equipment to ensure proper contact. Check that all components are in good condition and free from damage.
  2. Positioning: Carefully position the gearbox and the driven equipment according to the manufacturer’s specifications and the intended orientation of the bevel gears.
  3. Alignment: Use precision alignment tools, such as dial indicators or laser alignment systems, to ensure accurate alignment of the bevel gears. The goal is to achieve proper concentricity and parallelism between the input and output shafts of the gearbox.
  4. Bolt and Fasten: Securely bolt and fasten the gearbox to the mounting surface. Use appropriate torque settings as recommended by the manufacturer to ensure proper clamping force without overloading the fasteners.
  5. Lubrication: Apply the recommended lubricant to the bevel gears and other relevant components according to the manufacturer’s guidelines. Proper lubrication is crucial for reducing friction and wear during operation.
  6. Testing: After installation, perform a thorough functional test of the bevel gearbox. Check for any abnormal noise, vibration, or overheating during operation. Ensure that the gearbox operates smoothly and efficiently under different load conditions.
  7. Monitoring: Regularly monitor the performance of the bevel gearbox through routine inspections and maintenance. Keep an eye out for any signs of misalignment, wear, or other issues that may affect performance.

It’s important to follow the manufacturer’s installation and alignment guidelines closely, as proper installation practices contribute to the reliable and efficient operation of the bevel gearbox.

bevel gearbox

Bevel Gearbox: Function and Mechanics

A bevel gearbox is a type of mechanical device designed to transmit rotational motion and power between two intersecting shafts with non-parallel axes. It employs a set of bevel gears to change the direction of motion by 90 degrees. Bevel gearboxes are commonly used in various mechanical systems and applications where a change in rotational direction is required.

The function of a bevel gearbox can be summarized as follows:

  • Directional Change: A bevel gearbox is primarily utilized to redirect rotational motion from one input shaft to an output shaft that is oriented at a perpendicular angle. This enables the transmission of power and motion around corners or between different planes.
  • Torque Transfer: Bevel gearboxes are capable of transmitting torque between intersecting shafts, allowing for the efficient transfer of rotational force from the input shaft to the output shaft.
  • Speed Reduction or Increase: Depending on the arrangement of bevel gears, a bevel gearbox can also modify the rotational speed of the output shaft relative to the input shaft. This makes it possible to achieve speed reduction or speed increase as needed in the mechanical system.

The mechanics of a bevel gearbox involve the use of bevel gears, which have conically shaped teeth that allow them to mesh with each other at an angle. The most common types of bevel gears used in bevel gearboxes are straight bevel gears and spiral bevel gears.

When the input shaft rotates, its connected bevel gear engages with the first bevel gear in the gearbox. As a result, the rotational motion is transferred to the second bevel gear, which is mounted on the output shaft. The interaction of these gears changes the direction of rotation and transfers torque to the output shaft.

Bevel gearboxes are found in various applications, including automotive differentials, power tools, printing presses, machine tools, and other mechanical systems where torque transmission and directional changes are essential.

China best CZPT K Series Helical Bevel Gearbox Shaft Drive Motor Gearbox   sequential gearbox	China best CZPT K Series Helical Bevel Gearbox Shaft Drive Motor Gearbox   sequential gearbox
editor by CX 2024-05-08